If you already have an account with us, please use the login panel below to access your account.
I worked on a 25" Sony OLED a few weeks ago for Celebrity Apprentice. It was beautiful and extremely accurate.
The only down side was the lack of viewing angle. Plasma is still king in this regard.
BUYLONGTERM (02-14-2012), gadgtfreek (02-14-2012), speedking (02-14-2012)
I think Sony must have a business plan on a napkin..one day they are done with OLED..the next day it's crystal LED..then back to OLED..
hi guys
Extremely easy to work on.
Select the correct gamma from the presets, set the the correct color space, set the black and white levels, and then do a gray scale touch up.
Ill try to post a post result from the job if I can find it.
Gregg
speedking (02-14-2012)
I am trying to post the report. It is a 3 MB PDF. Jason, I will email it to you to post if your Vbulletin software will not let me.
DavidHir (02-15-2012), gadgtfreek (02-14-2012)
Gregg,
It seems the report is attached. Were you able to do it or did Jason do it for you? I'll double check that the Calibrator usergroup is allowed to post larger attachments.
BTW, We are looking into a new MOD that will show pictures of PDF's if you hover over the attachment
Christian
R.I.P. Loves2Watch
DISPLAYS
Pioneer Elite Pro151FD
Pioneer Kuro 5020FD
Samsung LN4065F
Panasonic TC-P65GT50
Panasonic TC-P55GT50
CAMERA GEAR
Canon 5D III
35L 1.4
70-200L 2.8 IS MK II
100L Macro 2.8 IS
Speedlite 580 EX II
Website: (Still under construction)
R.I.P. Loves2Watch
DISPLAYS
Pioneer Elite Pro151FD
Pioneer Kuro 5020FD
Samsung LN4065F
Panasonic TC-P65GT50
Panasonic TC-P55GT50
CAMERA GEAR
Canon 5D III
35L 1.4
70-200L 2.8 IS MK II
100L Macro 2.8 IS
Speedlite 580 EX II
Website: (Still under construction)
yup, it doesnt get better than that....Man, that chart is gorgeous
and also remember that is with a $24,000 measurement tool (so you know the data is dead on).
speedking (02-15-2012)
Thanks, Gregg. Were you able to measure the MLL or ANSI contrast ratio? I always hear OLEDs have remarkable blacks.
hi David
I have not measured the CR...my tools do not measure low enough. (and it really isnt relevant to what I am doing ).
DavidHir (02-16-2012), gadgtfreek (02-16-2012), speedking (02-16-2012)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks